Software for Automatic Positioning and Measurement / SGADVANCE
Designed to work with Excel, instructions for making the measurements, the resulting measurement data and additional analysis can all be incorporated into a single spreadsheet. Using SGADVANCEE makes it is possible to easily build measurement and control systems for a wide variety of measurement environments.
[Terminal Measurement Function]
.
● Positioning and measurement can be performed by listing and executing commands in an Excel sheet.
● Continuous process or step-by-step process can be selected.
● Use of SGTERM’s custom control scripts, “If”, “Jump”, “Loop” and “Print” in an Excel worksheet simplifies processing control.
● High speed operation can be achieved with buffering sequences in the Excel sheet before operation.
[Program Measurement Function / Excel Instruction Measurement Function ]
● Multiple repetition of positioning/measurement sequence is easily accomplished.
● Various functions are available such as manual or time-series measurement and count presetting.
● By creating Excel instruction files, both stage control and measurement with a measuring instrument can be performed simultaneously.
● Using this software in combination with motorized positioning devices offered by Sigma Koki, a positioning and measurement system can be easily configured.
● Measurement equipment or SIGMAKOKI motorized stage can be controlled separately with Excel Instruction Measurement Function.
● Program Measurement Function / Excel Instruction Measurement Function can operate multi-axis motorized stages.
● SGADVANCEE can control HIT-M and PGC-04-U.
◦ Measurement results are output to an Excel sheet making it easy to analyze and manage measured data.
◦ System configuration data can be saved as a “*.SGE” file, which facilitates setting of the same process again.
◦ RS232C※1/GP-IB※2/USB※3/LAN interfaces are supported.
◦ Compatible with Windows® 8/8.1/10/11 (64bit)※4.
◦ USB Key (Option) is a software key to activate SGADVANCEE on any PC.
※1 RS-232C ports are available from COM1 to COM8.
※2 As for GP-IB, only GP-IB of National Instruments Corporation is supported.
※3 USB is only supported for SHOT-302/304 series, HIT-M, FINE-01γ/503 series, and OMEC-2BG/4BG series.
※4 Conditions when used with Windows®8/8.1/10/11 are as follows.
・Administrative right is required for installation as well as execution.
・64 bit version is supported. Check on our website for the latest support status.
[+PLUS] *Option
◦ The function of SGLCES uses by SGADVANCE as +PLUS.
◦ The measurement which used more advanced measuring instruments, such as Spectororadiometers is possible.
※SGLCES was united with SGADVANCEE, and replaced with SGADVANCSEE+PLUS.
Catalog Code | W9088 |
---|---|
RoHS | Yes |
CE | No |
Guide | ▶Installing the trial version will require entering a serial number. The serial number for the trial version is shown on the download page. ▶Please click here to confirm software version and windows version compatibility. |