Center Unit / CEUT
This unit is used to set or fix a sample such as waveguides.
Samples such as waveguides can be fixed by adsorption or mechanical clamping.Two types of sample sizes are available: 5mm x 5mm and 10mm x 10mm.
The sample position and angle can be adjusted by 2-axis manual stage.
We also have options available that have a temperature control for a sample or a contact sensor for a sample and a fiber array.You can select the most appropriat type for your application.
CEUT Products Type (Manual stage part)
| Axis | X Axis | θy Axis |
|---|---|---|
| Component Products/Products Type | TADC-601SR | KSP-606MR |
| Travel | ±6.5mm | Coarse:360°、Fine:±5° |
| Lead of Actuator/rotation | 0.5mm | ｰ |
| Micrometer Readable Resolution | 0.01mm | Fine:About55.8″ |
| With temperature control 3 types (CEUT-TEC/CEUT-HTEC/CEUT-VTEC) | Without temperature control 3 types (CEUT-RT/CEUT-HRT/CEUT-VRT) |
|---|---|
 |
 |
CEUT Series Specifications(With temperature control)
| Part Number | Sample Holder Part | Contact sensor unit | Temperature control unit | Accessory | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Sample size *1 | Load cell | Load cell part number*2 | Load cell amplifier part number*2 | Contact sensing minimum resolution | Temperature control unit | Temperature control range *3 | Peltier Element | Thermistor Sensors | |||
| CEUT-TEC-5 | 5mm×5mm | Not Included | - | - | - | Included | 10℃～60℃ | Imax:8.5A Vmax:4.4V | 103AT-4(10kΩ) (SEMITEC Corporation.) | Vacuum suction tube (2m) | Connection cable to temperature controller *4 |
| CEUT-TEC-10 | 10mm×10mm | Not Included | - | - | - | Included | 10℃～60℃ | Imax:8.5A Vmax:4.4V | 103AT-4(10kΩ) (SEMITEC Corporation.) | Vacuum suction tube (2m) | Connection cable to temperature controller *4 |
| CEUT-HTEC-5 | 5mm×5mm | Included (horizontal direction) | LMA-A-10N(KYOWA ELECTRONIC INSTRUMENTS CO., LTD.) | TW-3S-002(Watanabe Electric Industry Co. Ltd.) | 0.25N | Included | 10℃～60℃ | Imax:8.5A Vmax:4.4V | 103AT-4(10kΩ) (SEMITEC Corporation.) | Vacuum suction tube (2m) | Connection cable to temperature controller *4 |
| CEUT-HTEC-10 | 10mm×10mm | Included (horizontal direction) | LMA-A-10N(KYOWA ELECTRONIC INSTRUMENTS CO., LTD.) | TW-3S-002(Watanabe Electric Industry Co. Ltd.) | 0.25N | Included | 10℃～60℃ | Imax:8.5A Vmax:4.4V | 103AT-4(10kΩ) (SEMITEC Corporation.) | Vacuum suction tube (2m) | Connection cable to temperature controller *4 |
| CEUT-VTEC-5 | 5mm×5mm | Included (Vertical direction) | LMA-A-10N(KYOWA ELECTRONIC INSTRUMENTS CO., LTD.) | TW-3S-002(Watanabe Electric Industry Co. Ltd.) | 0.25N | Included | 10℃～60℃ | Imax:8.5A Vmax:4.4V | 103AT-4(10kΩ) (SEMITEC Corporation.) | Vacuum suction tube (2m) | Connection cable to temperature controller *4 |
| CEUT-VTEC-10 | 10mm×10mm | Included (Vertical direction) | LMA-A-10N(KYOWA ELECTRONIC INSTRUMENTS CO., LTD.) | TW-3S-002(Watanabe Electric Industry Co. Ltd.) | 0.25N | Included | 10℃～60℃ | Imax:8.5A Vmax:4.4V | 103AT-4(10kΩ) (SEMITEC Corporation.) | Vacuum suction tube (2m) | Connection cable to temperature controller *4 |
*1 Device holders of different applicable sizes are available as stand-alone products.
*2 Please contact our sales department for the connection of load cells, amplifiers, and multi-controllers.
*3 Temperature control range may vary depending on the installation environment.
*4 In case of temperature control mechanism, used for connection with Peltier controller TDU-5000AR (Cell Systems Co., Ltd.).
CEUT Series Specifications(Without temperature control )
| Part Number | Sample Holder Part | Contact sensor unit | Temperature control unit | Accessory | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Sample size *1 | Load cell | Load cell part number*2 | Load cell amplifier part number *2 | Contact sensing minimum resolution | Temperature control unit | Temperature control range | Peltier Element | Thermistor Sensors | ||
| CEUT-RT-5 | 5mm×5mm | Not Included | - | - | - | Not Included | - | - | - | Vacuum suction tube (2m) |
| CEUT-RT-10 | 10mm×10mm | Not Included | - | - | - | Not Included | - | - | - | Vacuum suction tube (2m) |
| CEUT-HRT-5 | 5mm×5mm | Included (horizontal direction) | LMA-A-10N(KYOWA ELECTRONIC INSTRUMENTS CO., LTD.) | TW-3S-002(Watanabe Electric Industry Co. Ltd.) | 0.25N | Not Included | - | - | - | Vacuum suction tube (2m) |
| CEUT-HRT-10 | 10mm×10mm | Included (horizontal direction) | LMA-A-10N(KYOWA ELECTRONIC INSTRUMENTS CO., LTD.) | TW-3S-002(Watanabe Electric Industry Co. Ltd.) | 0.25N | Not Included | - | - | - | Vacuum suction tube (2m) |
| CEUT-VRT-5 | 5mm×5mm | Included（Vertical direction) | LMA-A-10N(KYOWA ELECTRONIC INSTRUMENTS CO., LTD.) | TW-3S-002(Watanabe Electric Industry Co. Ltd.) | 0.25N | Not Included | - | - | - | Vacuum suction tube (2m) |
| CEUT-VRT-10 | 10mm×10mm | Included(Vertical direction) | LMA-A-10N(KYOWA ELECTRONIC INSTRUMENTS CO., LTD.) | TW-3S-002(Watanabe Electric Industry Co. Ltd.) | 0.25N | Not Included | - | - | - | Vacuum suction tube (2m) |
*1 Device holders of different applicable sizes are available as stand-alone products.
*2 Please contact our sales department for the connection of load cells, amplifiers, and multi-controllers.
-
New
-
New
-
New
-
New
-
New
-
New
-
New
-
New
-
New
-
New
Center Unit with Temperature Control and Horizontal Contact Sensor / CEUT-HTEC-5¥500,000Contact us -
New
-
New
