- HOME >
- Application System >
- Laser Processing >
- Power Supply for Driving Laser Diode and Peltier Cooler
This is the power supply (supporting CW and pulse) for driving the laser diode (LD). The power supply for
driving a Peltier element and cooling unit all-in-one type required for driving LD is also part of our lineup.
LD Terminal Short Function
Function to short between anode and cathode of LD when power is switched OFF is equipped. By doing it,LD can be protected from static electricity, etc.
Goggle compatible white display
Letters can be displayed in white. Superior in legibility even when using laser-protect goggle.
Instantaneous power failure detection
LD can be safely protected by shutdown operation after instantaneous power failure detection, while there is electric current running after power has been cut off.
Various Alarm Functions
Alarm with screen display equipped enables prompt identification of cause and repair.
LD operation intergrator
LD operation intergrator function equipped, which is essential for LD lifecycle management.Zero reset available for LD replacement.
Full Interface
Interface equipped for setting in a system. Freely externally operable.
Simple Operation
Electric current limit setting and integrated time check can be done from a handle.
Electric current limit settings
Maximum electric current can be set in parameter. It prevents LD damage deriving from malfunction.
Low profile Laser Diode power supply with temperature controller.
Part Number | SPD0350S | SPD03A0S |
JP Yen | 543,000 | 571,000 |
LD Max. output voltage [V] | 3 | 3 |
LD Max. output current [A] | 50 | 100 |
Peltier driving voltage [V] | 36 | 36 |
Peltier driving current [A] | 9 | 9 |
Input AC voltage [V] |
Single phase 85 - 264 |
Single phase 85 - 264 |
Apparent power [VA] | 800 | 1000 |
Add to Cart |
Control method | High-frequency switching method for CW only |
Current ripple |
Less than 0.1% RMS (FS) (However, it is in the range of more than maximum output current × 10%) |
Current setting accuracy | 0.1A |
Output current error | <1% (for maximum output current) |
Linearity error | <1% (for maximum output current) |
Output current temperature character | <0.03%/C (for maximum output current) |
Rise time* | 1sec - |
Fall time* | 1sec - |
* If you want to shorten the rise / fall time, please contact our company separately.
Part Number | Power supply for Laser Diode + Peltier |
External dimensions | (W)414× (H)79× (D)430mm (Excluding projections) |
Operation ambient temperature | 0° - 40° |
Storage ambient temperature | -20℃ - 60℃ |
Ambient humidity | 20 - 90%RH (No condensation) |
Interface | RS232C, emergency stop interlock, emission interlock, emission etc. |
Accessory | Jumper connector, AC100V cable |
Constant current Laser Diode driver.
Closed loop temperature controller with built in Peltier driver.
Includes all essential functions to maintain SLD and STD’s performance in a small, low cost package.
Output currents of 50A and 100A.
Temperature resolution is 0.01°C.
Supports both Pt100 and thermistor as the temperature sensor.
Peltier driver maximum power of 300W.
We can receive an order for manufacturing a product with special specifications,
which is not shown in the catalog. Please contact the sales department.
Measurement part |
Applicable sensor | Thermistor or Pt100 (3wire system) | ||
Accuracy | 0.01℃ | AD convertor | 24bit | |
Control part | Control method | Digital PID system | ||
Control range |
-50℃ - 150℃ (depends on the sensor) |
|||
Max. current | 9A | Max. voltage | 36V |