New

Vacuum Pump / DA-20D

This is a vacuum pump that conducts vacuum exhaust through the reciprocating motion of a rubber thin film (diaphragm). Its simple structure makes it easy to handle.

Contact us

Part Number
DA-20D
More Information
RoHS No
CE No
Guide
  • If you wish to use this product outside of Japan, please contact us separately.
Attention
  • If the pump is stopped during load operation and immediately restarted afterwards, it may not restart. In this case, return the inside of the pump to atmospheric pressure.
  • Do not suction corrosive gases, organic solvents, liquids, or condensable gases (water vapor, etc.). Do not allow dust, dirt, etc. to enter the pump.
  • This vacuum pump is designed for indoor use only. Do not install the pump outdoors or in a location where it will be exposed to rain or water.
  • Prolonged operation near atmospheric pressure may cause the pump to malfunction in a short period of time.
Specifications
Actual Pumping Speed 20L/min(50Hz), 24L/min(60Hz)
Ultimate Pressure 5.33×103Pa (-96.0kPa*)
Electric motor used Single phase, 100V, 60W, 4P, Capacitor operation
Full-load current 1.6A
Weight 7.2kg
Inlet, Outlet port diameter O.D.φ9mm × I.D.φ5mm(Rc1/4)
Ambient temperature 7~40℃
Overall dimensions 118(W)×242(L)×178(H)mm
*Gauge pressure