Dichroic case for laser introduction / DIMC-355R
Allows the introduction of a laser beam into the optical path of the OUCI micrometer body products.
In stock
Only 3 left
Part Number
DIMC-355R
¥40,000
Catalog Code | W2041 |
---|---|
RoHS | Yes |
CE | No |
Download Product's Datasheet | |
CAD data | |
Guide | ▶Laser introduction direction can be adjusted in any direction of 360º. Please check the product instruction manual about the adjustment method. *Not included adjustment tool (Hex wrench). ▶The tilt adjustment of the internal mirror can be available. Please check the product instruction manual about the adjustment method. *Not included adjustment tools (Hex wrench and screwdriver). ▶Mounting standard of the objective lens is M26 P=0.706, but for mounting the conversion adapter attached to the observation unit with coaxial illumination conversion adapter |
Attention | ▶There is an adjustment mechanism in the internal mirror, but it is for only fine adjustment. ▶Incident of the laser beam is requested vertically as much as possible. ▶There is a possibility that the image of the coaxial observation in the laser introduction is not clear. |
Mounting screw thread for Observation unit | M26 P=0.706 |
Wavelength Range | 355nm |
Mounting screw for Objective lens | M26 P=0.706 |
Input aperture | φ10mm |
Reflectance | >99.5%(355nm) |
Laser Damage Threshold | 5J/cm2 (Laser pulse width 10ns, repetition frequency 20Hz) |
Weight | 0.12㎏ |