Large Vibration Isolation Systems with Aluminum Honeycomb Top (Automatic Vertical Leveling) / HOA-1512-150LA
Precision air spring vibration isolation system. Best suited for isolating vertical vibrations.
Contact us
Part Number
HOA-1512-150LA
¥799,000
◦This vibration isolator rapidly attenuates vibrations transmitted to mounted equipment and instruments, and is essential for mounting equipment and instruments that are affected by vibration.
◦The bench is lightweight with excellent stiffness due to the aluminum honeycomb core.
◦The top surface of the bench is magnetic stainless steel plate, with tapped holes (M6 25×25mm matrix) over the entire surface allowing both magnetic type and screw fixing type systems or equipment to be mounted.
◦The manual leveling system does not require a continuous air supply. The isolators can be pressurized with just a hand air pump.
◦The bench is lightweight with excellent stiffness due to the aluminum honeycomb core.
◦The top surface of the bench is magnetic stainless steel plate, with tapped holes (M6 25×25mm matrix) over the entire surface allowing both magnetic type and screw fixing type systems or equipment to be mounted.
◦The manual leveling system does not require a continuous air supply. The isolators can be pressurized with just a hand air pump.
Catalog Code | W6008 |
---|---|
RoHS | No |
CE | No |
Guide | ▶We can produce sizes not listed in the catalog. Contact our International Sales Division for more information. ▶When installed in locations with no air source, use the silent air compressor (PC-10H-S) which can be used indoors. (WEB Reference Catalog Code/W6003) |
Attention | ▶The vibration isolator may not perform normally if used under an extremely offset load or with instruments or equipment having a very high center of gravity. ▶Because of the weight, delivery cost will be quoted separately.Use the carry-in route and installation environment question sheet. (WEB Reference Catalog Code/W6001) ▶Use the Air Spring Vibration Isolator Model Selection Check Sheet to check usage, load capacity, or unclear points.(WEB Reference Catalog Code/W6002) |
A×B | 1,500×1,200mm |
H | 800mm |
T | 150mm |
Size | 1,500×1,200mm |
Type | Automatic Vertical Leveling |
Weight | 370kg |
Load capacity | 2,942N(about 300kgf) |
Natural Frequency (Vertical Direction) | about 1.5 − 1.75Hz |
Vibration Isolation Method (Vertical Direction) | Precision air spring |
Bench Material (Lower Plate) | Regular steel plate (hot rolled steel plate), thickness 4.5mm |
Bench Material (Upper Plate) | Magnetic stainless steel plate, thickness 5mm |
Bench Material (Lateral surface) | Black vinyl leatherette bonded to plywood |
Bench Top Surface | M6 tapped holes on 25×25mm matrix over the entire surface (leaving 25mm around the edges) |
Bench Top Surface Finish | Unpainted (satin finish) |
Honeycomb Material inside Bench | Aluminum |
Vibration Isolation Method (Vertical Direction) | Precision air spring |