Mini-Fiber Optics Holder / MFH-900
Holders used for holding optical fiber strands of various jacket diameters (coating diameters). By replacing the mounting adapters (MFH-ADP), these holders can mount on various stages in addition to two-axis pinholes/objective holders.
In stock
Only 1 left
Part Number
MFH-900
¥16,000
◦Using the V groove and the resin clamps, these holders hold the tip of an optical fiber where the coating is removed for approximately 15mm. The V groove and the resin clamps also fix the 900μm jacket right next to the portion to immobilize the optical fiber.
◦The resin clamps have built-in magnetizable set bolts, and gently fasten an optical fiber by the magnetic force of the magnets of these fiber holders.
◦There is a keyway on the bottom of these holders. The keyway can be installed on the keys of various mounting adapters (MFH-ADP) to slide back and forth. The holders are securely fastened on the mounting adapters with set bolts.
◦The resin clamps have built-in magnetizable set bolts, and gently fasten an optical fiber by the magnetic force of the magnets of these fiber holders.
◦There is a keyway on the bottom of these holders. The keyway can be installed on the keys of various mounting adapters (MFH-ADP) to slide back and forth. The holders are securely fastened on the mounting adapters with set bolts.
| Catalog Code | W4523 |
|---|---|
| RoHS | Yes |
| CE | No |
| Download Product's Datasheet | |
| CAD data | |
| Attention | ▶These holders cannot be installed in the fiber alignment systems (DAU). Please contact our International Sales Division for holders for the fiber alignment systems. |
| 3D_CAD | |
| Clad Diameter φA | φ125 - φ250μm |
| Jacket Diameter φB | φ900μm |
| Type | Holder |
| Weight | 0.03kg |
| Primary material | Aluminum |
| Finish | Black Anodized |
Related Products
