Beam Steering Holders / BSR_BSRU

Beam Steering Holders / BSR

Beam steering mounts are designed to easily change the height and direction of laser beams.

Length of the optional post (PO-20-***) can be specified at the time of purchase.
Mirrors φ25mm or less with a thickness of 5mm can be bonded to the holder
The clamps can be coarsely adjusted when rotated 50 mmabout the center post.
Adjustment screws are provided on the output side of the mirror to fine tune the direction of the output beam.

 

Specifications

Part Number Compatible Optics Diameter Compatible Optics Thickness Primary Material Finish Weight*
BSR-25 □25mm or less、φ25mm or less 3 - 5mm Aluminum Black Anodized 0.4kg

* Weight does not include the weight of posts and baseplates.
Note: The photograph shows a typical configuration combining baseplate (BSP-40100), post (PO-20-200) and two mirrors (TFA-30C05-10).

 

Precision Beam Steering Assembly / BSRU

The φ38.1mm dampened pole, and two holders are sold as a set.
High stability is obtained from the damping properties of the poles and the rigidity of the holders.
Use the optional mirror (φ30mm, thickness 5mm) by bonding it to the holder.
The mirror holders can be coarsely adjusted 75 mm about the pole.
Adjustment screws are provided on the output side of the holders to tilt the mirror, and angle adjustment of the output beam can be performed.

 

Common Specifications

Strut material Stainless steel, Finish: None
Control part primary material Primary Material:Aluminum, Finish: Black Anodized

 

Specifications

Part Number Compatible Optics Diameter Compatible Optics Thickness A B Weight
BSRU-177 φ30mm 5mm 177.8mm 33 - 40mm 3.0kg
BSRU-355 φ30mm 5mm 355.6mm 33 - 220mm 4.6kg
Shop By
Shopping Options
View as Grid List

3 Items

per page
Set Descending Direction
View as Grid List

3 Items

per page
Set Descending Direction