Offset-less Kinematic Mirror Holder / MHI-25.4-UU
The Kinematic Center Mount is designed to allow the mirror to be loaded from the rear, keeping the reflective front surface centered above the mounting hole.
Contact us
Part Number
MHI-25.4-UU
¥12,000
◦When this mount is rotated 45 degrees on an optical bench, the center of mirror will stay at the optical axis.
◦Cutouts and bevels allow these to be used as beamsplitter holders and not interfere with the transmitted beam.
◦Building the mirror frame into the support of the holder keeps the mount thin with a small footprint.
◦The small footprint allows more room to access the adjusters compared to regular kinematic mirror holders.
◦Includes alignment pin holes to accurately place mount in OEM instruments(φ3H7 except MHI-12.7, which is φ2H7).
◦Cutouts and bevels allow these to be used as beamsplitter holders and not interfere with the transmitted beam.
◦Building the mirror frame into the support of the holder keeps the mount thin with a small footprint.
◦The small footprint allows more room to access the adjusters compared to regular kinematic mirror holders.
◦Includes alignment pin holes to accurately place mount in OEM instruments(φ3H7 except MHI-12.7, which is φ2H7).
Catalog Code | W4102 |
---|---|
RoHS | Yes |
CE | No |
Download Product's Datasheet | |
CAD data | |
Guide | ▶Vertical control gimbal mirror and beamsplitter holders (BSHL) where the rotation of the fine adjustment matches the mirror center are also available. WEB Reference Catalog Code/W4021 ▶Can be mounted using an M4 low head screw to secure them from the top or an M6 threaded post from the bottom. (MHI-12.7 can be mounted with an M3 low head screw from the top and M4 threaded post from the bottom.) |
Attention | ▶MHI-12.7 limits the tilt and rotation to be ±1° and ±2° respectively, even when a low and small head hexagon socket head cap screw is used. ▶When securing a mirror with a low head hexagon socket head cap screw, a hex wrench may interfere with the mirror. Please retract the mirror by turning the rotation and tilt adjustment screws before tightening the low head hexagon socket head cap screw. ▶When securing a mirror on a baseplate with a M4 low head hexagon socket head cap screw, there will be ±1mm clearance. |
3D_CAD | |
Transmitted Beam Clear Aperture (45°Incidence) | φ13mm *When light is transmitted through a BK7 plane parallel substrate of 3mm thickness. |
Reflected Clear Aperture (45°Incidence) | φ15.5mm |
Adjustment Range /Tilt | ±1.5° |
Adjustment Range /Rotation | ±1.5° |
Resolution /Tilt | about 0.4°/rotation |
Resolution /Rotation | about 0.4°/rotation |
Weight | 0.12kg |
Primary material | Aluminum |
Compatible Optics Diameter | φ25mm, φ25.4mm |
Compatible Optics Thickness | 3 - 10mm |
Finish | Black Anodized |
Clear aperture | φ23mm |