C-Shape Stainless Steel Mirror Holders / MHK
This mirror holder is made by stainless steel and optimized for 12.7 mm dichroic mirrors and beamsplitters. Knob-less design is suitable for system integration.
High-resolution adjustment with precision screw (P=0.10 mm)Through hole on the body for crossed beam configuration. (can adopt 45 degrees rear reflection)
Two symmetric models, L-type and R-type are available.
It can be used for UV lasers where outgassing is a concern, as it is made of stainless steel and does not have any surface.
This product can be adjusted using a hex wrench, but we also offer a dedicated hex wrench with a knob (KCL-1513) for convenience.
Common Specifications
| Primary Material | Stainless |  |
Image of transmitting beam with 45 degrees incidence (Beamsplitter refractive index 1.52) |
|---|---|---|---|
| Finish | None |  |
Specifications
| Part Number | Compatible Optics Diameter | Compatible Optics Thickness | Clear Aperture | Number of Adjustment Axes | Adjustment Range | Resolution | Weight | ||
|---|---|---|---|---|---|---|---|---|---|
| Tilt | Rotation | Tilt | Rotation | ||||||
| MHK-12.7-L | φ12.7mm | 3 - 7mm | φ11mm | 2 | ±3° | ±3° | about 0.3°/rotation | about 0.3°/rotation | 0.025kg |
| MHK-12.7-R | φ12.7mm | 3 - 7mm | φ11mm | 2 | ±3° | ±3° | about 0.3°/rotation | about 0.3°/rotation | 0.025kg |
Option for MHK
| Product Name | Part Number | Weight |
|---|---|---|
| Hex Wrench with Knob | KCL-1513 | 0.002kg |
Shop By
Shopping Options
