Camera Holders / CMH
Post mounted ball head camera mount.
Allows cameras with standard 1/4-20 mounting holes to be used on an optical breadboard.
Loosen the clamp to freely position the camera, and tighten the clamp to lock in place.These platforms can mount any camera because they use the mounting screw standard commonly used for cameras.
Common Specification
Primary Material | Aluminum | |
---|---|---|
Finish | Black matte |
Specification
Part Number | Maximum Load Capacity | Weight | |
---|---|---|---|
With a Post φ12mm |
Without a Post | ||
CMH-1 | CMH-1-N | 29.5N (about 3kgf) | 0.17kg (Without a Post: 0.12kg) |
CMH-2 | CMH-2-N | 40N (about 4kgf) | 0.34kg (Without a Post: 0.29kg) |