Sample Holders / SHA
Holders for mounting samples with indefinite shape and prisms, cube beamsplitters, etc.
Convenient for setting optical axis of samples because it is fitted with a simple tilt adjustment mechanism.
The sample can be fixed without putting a load on it because spring clips are used to hold the sample.
Samples can be held at desired height if within the height specification range of the spring clip.
cSamples can also be fixed with screws, using mounting holes on the table surface. (SHA-40, SHA-60)
Common Specifications
Primary Material | Aluminum | |
---|---|---|
Finish | Black Anodized |
Specifications
Part Number | Table Size | Compatible Sample Height | Adjustment Range Tilt | Weight | ||||
---|---|---|---|---|---|---|---|---|
With a Post φ6mm |
With a Post φ12mm |
Mounting Hole: M4 (Without a Post) |
Mounting Hole: M6 (Without a Post) |
Mounting Hole :8-32UNC (Without a Post) |
||||
SHA-25-RO | - | SHA-25 | - | SHA-25-UU | 25x25mm | 0~25mm | ±3° | 0.06kg(Without a Post: 0.05kg) |
- | SHA-40-RO | SHA-40-EE | SHA-40 | SHA-40-UU | 40x40mm | 0~35mm | ±2° | 0.13kg(Without a Post: 0.075kg) |
- | SHA-60-RO | - | SHA-60 | - | 60x60mm | 10~50mm | ±2° | 0.26kg(Without a Post: 0.2kg) |
- | SHA-65-RO | SHA-65-EE | SHA-65 | SHA-65-UU | 65x65mm | 10~50mm | ±2° | 0.25kg(Without a Post: 0.2kg) |
Shop By
Now Shopping by
Shopping Options
- Compatible Optics Diameter 0~35mm Remove This Item