Prism Holder / KKD-40PH
Designed to hole cubed optics or right angle prisms. All four polished surfaces of a cubed prism can be used with these mounts.
In stock
Only 1 left
Part Number
KKD-40PH
¥32,300
◦The KKD series has tip, tilt and yaw rotation for fine adjustment of reflected beams.
◦The clamp screw will not rotate the prism when clamping.
◦The clamp screw will not rotate the prism when clamping.
| Catalog Code | W4025 |
|---|---|
| RoHS | Yes |
| CE | No |
| Download Product's Datasheet | |
| CAD data | |
| Guide | ▶θαβ axis stages without prism retainer and strut (KKD-C) are also available. WEB Reference Catalog Code/W7111 ▶Post length can be changed by specifying the post length when you place an order. We may charge the difference in price depending on the length. Contact our Sales Division for more information. |
| Attention | ▶KKD-25PH and PLH-25 might not exert sufficient pressure to retain a prism, and there is a risk that optics might fall out. Use after making sure that the prism is fixed. ▶After adjusting the KKD series, if the prism retainer is lifted, the prism table sometimes moves, throwing off adjustment of tilt and rotation. Use without touching the prism retainer after adjustment. |
| 3D_CAD | |
| Weight | 0.2kg |
| Primary material | Aluminum |
| Adjustment Range /Tilt | ±3° |
| Adjustment Range /Rotation | ±3° |
| Compatible Optics Dimensions | □5 - □20mm |
| Finish | Black Anodized |
| Resolution /Tilt | about 1.5°/rotation |
| Resolution /Rotation | about 2.0°/rotation |
Related Products
