Topmike Vertical Control Mirror Holder / LMHB-30M
Top adjustment of these mirror mounts allow for devices to be placed in close proximity with each other. The mount can be mounted so that the micrometers are facing upwards or horizontally with the correct baseplate.
In stock
Only 1 left
Part Number
LMHB-30M
¥33,000
◦The optical axis of the mount does not change with vertical or horizontal mounting.
◦Each baseplate will work with the mount vertically or horizontally.
◦Each baseplate will work with the mount vertically or horizontally.
| Catalog Code | W4503 |
|---|---|
| RoHS | Yes |
| CE | No |
| Download Product's Datasheet | |
| CAD data | |
| Guide | ▶Vertical control gimbal mirror and beamsplitter holders (BSHL) of which rotation center of fine adjustment matches the center of the mirror reflective surface are also available. WEB Reference Catalog Code/W4012 |
| Attention | ▶LMHBP plates are required to install the mount onto an optical table. ▶Beamsplitters will have the transmitted beam partially blocked at 45 degrees incident. MHG or MHAN mounts are commended for beamsplitters. WEB Reference Catalog Code/W4001, WEB Reference Catalog Code/W4010 |
| 3D_CAD | |
| Type | キネマティック |
| Adjustment Range /Tilt | ±2.8° |
| Adjustment Range /Rotation | ±2.8° |
| Resolution /Tilt | about 0.006°/rotation |
| Resolution /Rotation | about 0.006°/rotation |
| Weight | 0.44kg |
| Primary material | Aluminum |
| Coarse Resolution /Tilt | － |
| Coarse Resolution /Rotation | － |
| Compatible Optics Diameter | φ30mm |
| Compatible Optics Thickness | 3 - 9mm |
| Fine Adjuster Indicator Conversion /Tilt | － |
| Fine Adjuster Indicator Conversion /Rotation | － |
| Fine Adjustment Range /Tilt | － |
| Fine Adjustment Range /Rotation | － |
| Finish | Black Anodized |
