High Precision Kinematic Mirror Mounts / MHM-30-R
Precision 0.1mm thread pitch fine adjustment screw introduces high resolutions. It is thinner than MHG mounts.
In stock
Only 2 left
Part Number
MHM-30-R
¥12,700
◦ The C-shaped mounting frame facilitate close-proximity positioning of the optical passes.◦ The holders are thin which offer more adjustment space compared to the MHG series.
◦ Mirrors are held are three points along the side to distribute the stress on the mirror evenly.
◦ The use of retaining rings does not constrain the clear aperture. A large clear aperture can be obtained with reflected or transmitted light.
◦ Mirrors are held are three points along the side to distribute the stress on the mirror evenly.
◦ The use of retaining rings does not constrain the clear aperture. A large clear aperture can be obtained with reflected or transmitted light.
Catalog Code | W4540 |
---|---|
RoHS | Yes |
CE | No |
Download Product's Datasheet | |
CAD data | |
Guide | ▶MHG-NL mirror holders can have locking mechanisms for adjustments screws. (WEB Reference Catalog Code/W4001) ▶These holders can be mounted on separate post holders or M6 threaded posts. |
Attention | ▶The threaded hole for posts is offset from the center of the mirror reflective surface. These holders can not be used for installation on an optical bench at 45 degrees incidence. Only mirrors without and offset can be used for this application (MHI). (WEB Reference Catalog Code/W4102) ▶ The rotation center for fine adjustment is not along the center of the mirror reflective surface. If fine adjustment is required, please us gimbal mirror holders (MHAN). Gimbal mirror holders have fine adjustments along the center of the mirror reflective surface. (WEB Reference Catalog Code/W4010) |
3D_CAD | |
45 ° incident crossbeam | φ13.6mm (Optics condition; thickness 3 mm refractive index 1.52) |
Adjustment Range /Tilt | ±3° |
Adjustment Range /Rotation | ±3° |
Compatible Optics Diameter | φ30mm |
Though hole | φ27mm |
Weight | 0.064kg |
Number of Adjustment Axes | 2 points |
Compatible Optics Thickness | 3 - 5mm |
Resolution /Tilt | about 0.15°/rotation |
Resolution /Rotation | about 0.15°/rotation |