OSMS Series Translation Motorized Stages - 5 Phase Stepping Motor / OSMS33-800(X)
Stepping motor driven stages, ideal for positioning of measuring instruments or inspection tools for which high stiffness and high precision are required.
The 800 mm travel range allows it to be moved over a wide area.
The 800 mm travel range allows it to be moved over a wide area.
Contact us
Part Number
OSMS33-800(X)
¥488,000
◦U-shaped rail offers light weight, and minimized deflection to achieve high stiffness.
| Catalog Code | W9071 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| RoHS | Yes | |||||||||||
| CE | No | |||||||||||
| Download Product's Datasheet | ||||||||||||
| CAD data | ||||||||||||
| Guide | ▶Contact our International Sales Division if you desire to change motors, etc. WEB Reference Catalog Code/W9500 (Motorized Stage System Question Sheet) ▶Grease change is optionally available. (WEB Reference Catalog Code/W9006) ▶We will assemble your X axis stage with a newly purchased X axis stage at a separate cost. ▶When used as an XY-axis, a support mechanism to minimize deflection of the upper axis is separately required. Please contact our sales department. ▶When used as a Z-axis, a dedicated bracket is separately required. Please contact our sales department. |
|||||||||||
| Attention | ▶Please note that the OSMS33-800 series is a heavy and lengthy cargo, so packing fee will be charged separately. (See the table on the bellow).
▶Please contact our sales department for more information about the intended use, unbalanced load, and load capacity. |
|||||||||||
| MAX Speed | 120mm/sec | |||||||||||
| Stage Material | Aluminium | |||||||||||
| Sensor Part Number | Micro photo sensor : GP1S092HCPIF(Sharp Corporation) | |||||||||||
| Stage Size | 120×120mm | |||||||||||
| Backlash | 3μm | |||||||||||
| Pitch | 45″ | |||||||||||
| Moment Stiffness / Pitch | 0.12″/N･cm | |||||||||||
| Moment Stiffness / Yaw | 0.08″/N･cm | |||||||||||
| Moment Stiffness / Roll | 0.1″/N･cm | |||||||||||
| Yaw | 30″ | |||||||||||
| Limit Sensor | Equipped (NORMAL CLOSE) | |||||||||||
| Lost Motion | 5μm | |||||||||||
| Positioning Accuracy | 30μm | |||||||||||
| Positioning Slide | Outer rail structure | |||||||||||
| Travel | 800mm | |||||||||||
| Proximity Origin Sensor | Equipped (NORMAL OPEN) | |||||||||||
| Positional Repeatability | 8μm | |||||||||||
| Origin Sensor | Equipped (NORMAL OPEN) | |||||||||||
| Weight | 15.8kg | |||||||||||
| Running Parallelism | 30μm | |||||||||||
| Feed Screw | Ball screw diameter φ10mm, 10mm lead | |||||||||||
| Load Capacity | 196N（20.0kgf） | |||||||||||
| Finish | Black anodized | |||||||||||
| Resolution (Full) | 20μm/pulse | |||||||||||
| Resolution (Half) | 10μm/pulse | |||||||||||
| Parallelism | 50μm | |||||||||||
| Sensor / Output Logic | When shaded: Output transistor OFF (no conduction) : Limit Sensor When shaded: Output transistor ON (conduction): Origin sensor, Proximity Origin Sensor |
|||||||||||
| Sensor / Current Consumption | 80mA or lower (20mA or lower per sensor) | |||||||||||
| Sensor / Control Output | NPN open collector output DC30V or lower, 50mA or lower | |||||||||||
| Sensor / Power Voltage | DC5～24V±10％ | |||||||||||
| Motor / Motor Step Angle | 0.72° | |||||||||||
| Motor / Motor Type | 5-phase stepping motor 0.75A/phase (Tamagawa Seiki Co., Ltd.) | |||||||||||
| Motor / Motor Part Number | TS3667N43E967（□42mm） | |||||||||||
| Compatible Controller | SHOT-702H､SHOT-302GS､SHOT-304GS、HIT-MV・HIT-SA、PGC-04-U、HSC-103 | |||||||||||
| Compatible Driver | MC-S0514ZU、SG-514MSC､MC-S7514PCL |
Related Products
