Infrared (NIR) Objective Lens / PAL-20-NIR-HR-LC00
This is a high NA infinity corrected objective lens for laser processing (femtosecond laser and fundamental of YAG laser). You can also observe the laser beam coaxially with a laser processed surface that is designed to reduce the aberration of the visible wavelength.
Contact us
Part Number
PAL-20-NIR-HR-LC00
¥200,000
◦With its long working distance and field curvature corrected, its natural observation image is obtained to the periphery of the visual field.
◦It is the long working infinity correction function that is used to introduce a laser system and coaxial observation.
◦It is also used for the observation of infrared light.
◦PAL-20-NIR-LC00/PAL-20-NIR-HR-LC00/PAL-50-NIR-HR-LC00 include protective glass unit (t=1.8mm). The protective glass will help protect the objective lens from debris spattering and scattered by laser processing. The protective glass unit can be replaced.
◦These variety of objective lens can be used with a pulse laser of visible light such as 532nm. The damage threshold of each lens is 0.1J/cm2 at 532nm, 0.2J/cm2 at 1064nm (reference). (Laser pulse width 10nSec, repetition frequency 20Hz)
◦It is the long working infinity correction function that is used to introduce a laser system and coaxial observation.
◦It is also used for the observation of infrared light.
◦PAL-20-NIR-LC00/PAL-20-NIR-HR-LC00/PAL-50-NIR-HR-LC00 include protective glass unit (t=1.8mm). The protective glass will help protect the objective lens from debris spattering and scattered by laser processing. The protective glass unit can be replaced.
◦These variety of objective lens can be used with a pulse laser of visible light such as 532nm. The damage threshold of each lens is 0.1J/cm2 at 532nm, 0.2J/cm2 at 1064nm (reference). (Laser pulse width 10nSec, repetition frequency 20Hz)
Catalog Code | W3457 | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
RoHS | Yes | ||||||||||||||||||||
CE | No | ||||||||||||||||||||
Download Product's Datasheet | |||||||||||||||||||||
CAD data | |||||||||||||||||||||
Guide | ▶Available fixed objective lens holder (LHO-26). WEB Reference Catalog Code/W4024 ▶When the objective lens is fixed to a 2 axis holder, please consult our Sales Division. ▶▶For laser processing |
||||||||||||||||||||
Attention | ▶When an objective lens is used in laser processing, use the diameter of the incident beam to extend to a size of half the pupil diameter (1/e2). A small light spot cannot be achieved when the incident beam is too narrow. Please note if there is a laser energy density increase, there will be a high possibility of damage to the objective lens. ▶The surface of an objective lens can be contaminated by debris during processing. To avoid this, please have sufficient working distance (WD) and insert a thin protective glass on the objective. ▶If the incident laser beam femtosecond is below 100fs |
||||||||||||||||||||
Specifications |
|