Caliper Variable Lens Holder / SLH-25-UU
Designed to hold lenses with a range of diameters at a consistent center height. Best used in applications where different diameter lenses are swapped out often.
Contact us
Part Number
SLH-25-UU
¥17,000
◦The three jaws of the holder will clamp edge of the lenses with spring pressure.
◦Squeezing the levers towards each other will open the three jaws. Releasing the levers will close the jaws.
◦The position of the three jaws is locked by tightening the clamp.
◦Squeezing the levers towards each other will open the three jaws. Releasing the levers will close the jaws.
◦The position of the three jaws is locked by tightening the clamp.
Catalog Code | W4019 |
---|---|
RoHS | Yes |
CE | No |
Download Product's Datasheet | |
CAD data | |
Guide | ▶Post length can be changed. If the length of post is specified at the time of purchase, this product will be delivered after replacing posts. ▶Post length can be changed by specifying the post length when you place an order. We may charge the difference in price depending on the length. Contact our Sales Division for more information. |
Attention | ▶Thin lenses may tilt and fall out from the holders when they are held with excessive spring pressure. ▶ALHN lens holders are recommended when precise lens manipulation is required. WEB Reference Catalog Code/W4016-2 |
Weight | 0.05kg |
Primary material | Aluminum |
Compatible Optics Diameter | φ5 - φ25.4mm |
Compatible Optics Thickness | 1 - 3mm |
Finish | Black Anodized |