- HOME >
- Support >
- Motorized Stages >
- Stage Controllers
| Software | Download |
|
How to connect the RS232C for HIT-M(MV) HIT-M(MV) |
 ：991KB
|
|
How to setup the LAN for HIT-M(MV)/PGC-04(U) HIT-M(MV)/PGC-04(U) |
：0.7MB
|
|
How to edit the Momeryswitch for HIT-M(MV) HIT-M(MV) |
：370KB
|
|
Quick manual for controller connection(SGADVANCE & SGSample) |
：1.1MB
|
|
PAT-001 Configuration Program (for 32bit only) The version (Ver1.23) which a function was added is exhibited. |
 ：2.0MB
|
|
PAT-001 Configuration Program (for 32/64 bit) The version (Ver2.01) supports Windows for 64 bits. * More than .NETFramework 3.5 are necessary. |
：0.7MB
|
|
GSC-01 Configuration Program (for 32/64 bit) The version (Ver1.03) supports Windows for 64 bits. * More than .NETFramework 3.5 are necessary. |
：0.7MB
|
|
About the Trigger Output [PDF] MARK-202, MARK-204-MS, MARK-202AM, MARK-204AM, MARK-204AM-MS, SHOT-202,SHOT-204MS |
：92KB
|
|
FC-Series Parameter software(for windows) |
：2.4MB
|
|
FC-Series FirmwareWriter(for windows) |
：4.2MB
|
FC-Series Parameter software was upgraded to Ver.1.10 from Ver.1.09. [21.08.31]
FC-Series FirmwareWriter was added. [21.08.31]
FC-Series Parameter software was upgraded to Ver.1.09 from Ver.1.08. [21.05.19]
FC-Series Parameter software was upgraded to Ver.1.08 from Ver.1.06. [21.01.19]
GSC-01 Configuration Program(for 32/64bit) was upgraded to Ver.1.03 from Ver.1.01. Main changes: A bug was corrected.[14.01.07]
PAT-001 Configuration Program(for 32/64bit) was upgraded to Ver.2.01 from Ver.2.00. Main changes: A bug was corrected.[12.12.18]
SG-01 Configuration Program(for 32/64bit) was upgraded to Ver.1.01 from Ver.1.00. Main changes: A bug was corrected.[12.12.18]
PAT-001 Configuration Program was upgraded to Ver.1.23 from Ver.1.22. Main changes: It supports a port of the RS232C to COM16.[08.10.14]
