Z Axis Piezo Assist Stage (with Z Bracket) / TADC-403LPA
Z-axis stage with Z bracket that allows fine adjustment of 20nm or less by adding a piezo assist mechanism to the manual stage. Ideal for manual stage units and systems that require high resolution position adjustment.
Stage sizes 25x25, 40x40, 60x60mm are available.
Contact us
Part Number
TADC-403LPA
¥72,500
◦A dedicated controller for the piezo assist stage easily perform fine adjustment without any setting. The fine adjustment of the dial type knob can be used without resistance even in combination with a micrometer head.
| Catalog Code | W7159 |
|---|---|
| RoHS | Yes |
| CE | Yes |
| Download Product's Datasheet | |
| CAD data | |
| Guide | ▶Use the piezo assist controller (PASC) to adjust the fine movement mechanism. A piezo assist controller connection cable (2m) is included with the piezo assist stage. |
| Attention | ▶When installing the stage, be careful not to give a shock to the micrometer bracket. Otherwise, the piezo assist mechanism may be damaged. ▶ When the power of the piezo assist dedicated controller (PASC) is turned off, the position adjustment of the piezo assist will be changed, and position for fine adjustment will be shifted. |
| Stage Size | 40×40mm |
| Piezo resolution | <20nm |
| Micrometer Readable Resolution | 0.01mm |
| Micrometer Position | Side |
| Moment Stiffness / Pitch | 0.66″/N･cm |
| Guide Method | Extended Contact Ball Bearing Guide |
| Travel Accuracy / Straightness | 3μm |
| Running Parallelism | 10μm |
| Lead of Actuator | 0.5mm |
| Max. Moment Capacity / Pitch | 2.5N･m |
| Max. Moment Capacity / Roll | 2.5N･m |
| Weight | 0.21㎏ |
| Primary material | Aluminum |
| Travel of Coarse Drive | ±6.5mm |
| Load Capacity | 9.8N（1.0kgf） |
| Travel of Fine Drive | >30μm |
| Finish | Black anodized |
Related Products
