ZnSe Window for Infrared Laser / WZSA-38.1C03-10600A
Windows made of zinc selenium (ZnSe) is the most commonly used optical material that allows transmission of infrared light. Nonhygroscopic and extremely stable under normal conditions, in contrast to other salt-based infrared materials.
In stock
Only 1 left
Part Number
WZSA-38.1C03-10600A
¥72,000
◦Non-coated and AR coated products for CO2 lasers are available.
◦In contrast to other optical materials for infrared light such as Ge (germanium), or Si (silicon), ZnSe windows allow transmission of some visible light, enabling easier adjustment (alignment) of the optical axis of infrared laser systems and enabling use of more convenient and inexpensive He-Ne lasers.
About the handling policy of ZnSe optics
Legally, ZnSe has been considered as a toxic optic substance,the non-coated product (OPZS) must be delivered with a certificate of Acquisition of Poisonous and Harmful Substances.
In addition, ZnSe Optics disposal after use is prohibited in general. However, we only take back products that we supplied.This policy noted is in Japan and other countries may differ in the treatment of ZnSe (Zinc selenide), please contact your local sales office.
◦In contrast to other optical materials for infrared light such as Ge (germanium), or Si (silicon), ZnSe windows allow transmission of some visible light, enabling easier adjustment (alignment) of the optical axis of infrared laser systems and enabling use of more convenient and inexpensive He-Ne lasers.
About the handling policy of ZnSe optics
Legally, ZnSe has been considered as a toxic optic substance,the non-coated product (OPZS) must be delivered with a certificate of Acquisition of Poisonous and Harmful Substances.
In addition, ZnSe Optics disposal after use is prohibited in general. However, we only take back products that we supplied.This policy noted is in Japan and other countries may differ in the treatment of ZnSe (Zinc selenide), please contact your local sales office.
Catalog Code | W3152 | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
RoHS | Yes | ||||||||||||||||||
CE | No | ||||||||||||||||||
Download Product's Datasheet | |||||||||||||||||||
Guide | ▶We also offer ZnSe lens (SLZS) for use in CO2 Laser. WEB Reference Catalog Code/W3074 ▶For product sizes and wedges which are not listed on our website or in our catalog |
||||||||||||||||||
Attention | ▶Toxic hydrogen selenide is generated by contact with strong acids when it is immersed in a solution such as sulfuric acid or hydrochloric acid. Please do not use liquid solution to be in contact with ZnSe. ▶Focusing with a high power laser onto the ZnSe lens, toxic gases may occur by heat decomposition. When ZnSe is damaged with over heating of Laser a large amount of gas and powder may occur. It case of breaking ZnSe, please avoid touching the substrates with bare hand and avoid breathing on powder and the gas. ▶The surface and the back side of non-coated type has approximately 17% of reflectivity on each surface. The total power loss in transmittance is estimated at 30%. ▶The WZSQ type must be used at incident angle at 0 degrees for a best transmittance. |
||||||||||||||||||
Specifications |
|