Suction Switching Valve Set / VES
This is a set of vacuum equipment that can be used for our standard products with vacuum suction mechanism. Two types of suction ports are available: 1 and 3.
The air valve enables ON/OFF of the suction. adsorption.The plate for installation enables fixing to M6 surface plate, etc.
The lever can be easily switched between suction adsorption and release.
A vacuum pump is required to use the suction switching valve set. Refer to Vacuum Pump (DA-20D) for recommended vacuum pump.
| Product Name/Part Number | Suction Switching Valve Set / VES1 | Suction Switching Valve Set / VES3 | (Recommended) Vacuum pump / DA-20D (sold separately) |
|---|---|---|---|
| Product Image |  |
 |
 |
Specifications
| Part Number | Number of Suction Ports | Applicable Tubes | Air Valves | Speed Controller | Accessories | |||
|---|---|---|---|---|---|---|---|---|
| Device Holder Side | Vacuum Pump Side | Polyurethane Tubing | Diverting Valve | Air Fittings for Vacuum Pumps * | ||||
| VES1 | 1 | Inside diameter: φ2.5mm, Outer diameter: φ4mm | Inside diameter: φ4mm, Outer diameter: φ6mm | 41V (Koganei Corporation) | PP-6A (KIT Corporation) | UB0640-20-C (Nihon Pisco Co., Ltd.), 3m×1 | - | PC6-02 (Nihon Pisco Co., Ltd.)×1 |
| VES3 | 3 | Inside diameter: φ2.5mm, Outer diameter: φ4mm | Inside diameter: φ4mm, Outer diameter: φ6mm | 41V (Koganei Corporation) | PP-6A (KIT Corporation) | UB0640-20-C (Nihon Pisco Co., Ltd.), 3m×1 | UXA6M (KIT Corporation)×1 | PC6-02 (Nihon Pisco Co., Ltd.)×1 |
*1 Used to connect with DA-20D (ULVAC Co., Ltd.).
-
New
-
New
