Optical Fiber Collimator housing / FC-25.4PC
Housing for Optical Fiber Collimator. Using this housing with collimator lens (FCL), the output beam from FC connector fiber is collimated.
In stock
Only 1 left
Part Number
FC-25.4PC
¥11,000
◦ Available for collimator lens with short to middle focus length.
◦ Including focus adjustment mount for collimator lens.
◦ Total four types: for PC polished and APC polished, small aperture and middle aperture
◦ Including focus adjustment mount for collimator lens.
◦ Total four types: for PC polished and APC polished, small aperture and middle aperture
| Catalog Code | W4140 |
|---|---|
| RoHS | Yes |
| CE | No |
| CAD data | |
| Guide | ▶Optical Fiber Collimator Holder is available. It can hold the housing and adjust the beam angle. Exclusive holder for FC-12.7(PC/APC) is FHG-12.7. WEB Reference Catalog Code/W4141 FC-25.4(PC/APC) can be mounted on mirror holders with diameter 25.4mm. ▶Adjustment wrench (FCS) is available. It enable adjusting the position of collimator lens with observing the output beam. WEB Reference Catalog Code/W4142 |
| Attention | ▶Optical Fiber Collimator Housing doesn’t include collimator lens. Please use with collimator lens (FCL) WEB Reference Catalog Code/W4143 ▶When FC-12.7(PC/APC) is mounted on Kinematic Mirror Holder (MHG-MP12.7-NL), there are cases where the connector cannot be mounted/dismounted. |
| 3D_CAD | |
| Compatible Collimator Lens | ＜φ9.2mm |
| Mounting Screw for Collimator Lens | M9 P0.5 mm |
| Collimate Adjustable Range | 3 - 18mm |
| Collimate Adjustable Resolution | 0.5mm / rotation |
| Compatible Fiber End | FC/PC |
| Weight | 0.028kg |
| Primary material | Stainless steel |
| Finish | None |
| Outer Mount Diameter | φ25.4mm |
Related Products
