Precision Motorized Stages - 5 Phase Stepping Motor / HST-50X
High precision X axis stages fitted with precision ball screws and precision crossed roller.
Contact us
Part Number
HST-50X
¥298,000
◦The combination of HST Series and 3 axis Stage Controllers HSC-103 can perform low-noise and low-vibration operation, compared with conventional products.
◦Steel body offers excellent stiffness and high load capacity.
◦Steel body offers excellent stiffness and high load capacity.
| Catalog Code | W9089 |
|---|---|
| RoHS | Yes |
| CE | Yes |
| Download Product's Datasheet | |
| CAD data | |
| Guide | ▶Contact our Sales Division if you desire to change motors, etc. Or, use the motorized stage system question sheet.(WEB Reference Catalog Code/W9500) (Question Sheet) ▶Two single axis stages can be sent to OptoSigma to be assembled, aligned and tested for a nominal cost. |
| Attention | ▶We will assemble your X axis stage with a newly purchased X axis stage at a separate cost. |
| 3D_CAD | |
| MAX Speed | 10mm/sec |
| Stage Material | Steel |
| Sensor Part Number | Micro photo sensor : GP1S092HCPIF(Sharp Corporation) |
| Stage Size | 165×165mm |
| Backlash | 1μm |
| Pitch | 15″ |
| Moment Stiffness / Pitch | 0.01″/N･cm |
| Moment Stiffness / Yaw | 0.01″/N･cm |
| Moment Stiffness / Roll | 0.005″/N･cm |
| Yaw | 15″ |
| Limit Sensor | Equipped (NORMAL CLOSE) |
| Lost Motion | 1μm |
| Positioning Accuracy | 5μm |
| Positioning Slide | Crossed roller |
| Travel | 50mm |
| Proximity Origin Sensor | Equipped (NORMAL OPEN) |
| Positional Repeatability | 2μm |
| Origin Sensor | Equipped (NORMAL OPEN) |
| Minimum Incremental Motion (reference) | 0.1μm |
| Weight | 8.7kg |
| Running Parallelism | 10μm |
| Feed Screw | BBall screw diameter φ10mm, 2mm lead |
| Load Capacity | 392N(40.0kgf) |
| Resolution (Full) | 4μm/pulse |
| Resolution (Half) | 2μm/pulse |
| Parallelism | 50μm |
| Sensor / Output Logic | When shaded: Output transistor OFF (no conduction)：Limit Sensor When shaded: Output transistor ON (conduction): Origin sensor,Proximity Origin Sensor |
| Sensor / Current Consumption | 80mA or lower (20mA or lower per sensor) |
| Sensor / Control Output | NPN open collector output DC30V or lower, 50mA or lower |
| Sensor / Power Voltage | DC5～24V±10％ |
| Motor / Motor Step Angle | 0.72° |
| Motor / Motor Type | 5-phase stepping motor 1.4A/phase (Oriental Motor Co., Ltd.) |
| Motor / Motor Part Number | PKP544N18B（□42mm） |
| Type of Axis | X Axis |
| Compatible Controller | HSC-103、SHOT-302GS、SHOT-304GS、HIT-M・HIT-SH、PGC-04-U |
| Compatible Driver | SG-5M、MC-S0514ZU、SG-514MSC、MC-7514PCL |
Related Products
