同轴照明观察装置选购件

Peripheral Options

Product Name	Product Number	Product Introduction
Illumination Port Filter Unit	OUCI-IFH	By attaching it to your observation unit with coaxial illumination (OUCI series), you can observe at any wavelength.
C-mount Filter Unit	OUCI-CFH	This is an attachment to replace the C-mount part of the observation unit with coaxial illumination (OUCI) to enable insertion and removal of filters.
C-mount adapter for FC fiber connector	CMFC-ADP	Adapter for FC connector optical fiber used for spectroscopic measurement under a microscope, etc. It is used by connecting to the C-mount of the spare observation port of a 2-port observation unit with coaxial illumination (OUCI-3-M1M1), etc.
C-Mount Adapter for SMAFiber Connector	CMSMA-ADP	Adapter for SMA connector optical fiber used for spectroscopic measurement under a microscope, etc. It is used by connecting the C-mount of the spare observation port of a 2-port observation unit with coaxial illumination (OUCI-3-M1M1), etc.
Mirror Block for Optical Path Bending	TFAC-VIS	Attached to an observation unit with coaxial illumination, the objective lens mounting direction can be bent 90 degrees.
Dichroic Block for Laser Introduction	DIMC-R-A series	By attaching this Dichroic block to the observation unit with coaxial illumination (OUCI), it can be used as a coaxial processing observation unit. 30 mm optical cage system can be used in combination.
	DIMC-1064R-A	For 1064nm
	DIMC-532R-A	Fot 532nm
	DIMC-355R-A	For 355nm
	DIMC-266R-A	For 266nm
C-mount Adapter	CACM series	This adapter is attached to the observation unit with coaxial illumination (OUCI) to adjust the center and focus position of the C-mount camera. When the OUCI is combined with a dichroic block for laser introduction, the center of the observation field of view and focus can be adjusted based on the focusing position of the laser beam incident on the dichroic block.
	CACM-1	Centering adjustment support *No focus adjustment mechanism
	CACM-2	Centering adjustment ＋Focus adjustment support
	CACM-3	Focus adjustment support *No focus adjustment mechanism
Objective Lens Mounting Screw Conversion Ring	CR26-25	It is a mounting screw conversion ring that allows objective lenses of various companies with different screw pitches to be mounted on Sigma Koki optical tubes. It is possible to attach an infinity-corrected objective lens from various companies to the mounting hole of Sigma Koki's coaxial observation lens barrel (φ26 p=0.706). We also offer a ring that can convert the M25 mounting hole to φ26mm.
	CR26-20.32
	CR25-26
	CR25-20.32
Parfocal Length Extension Adapter (35mm)	PE35-26-25	This adapter is used to adjust the length of the objective lens so that they are at the same focal point when mounted on an objective lens revolver with objective lenses of various manufacturers with different focal lengths.
Parfocal Length Extension Adapter (15mm)	PE15-25-2032	PE35-26-25＋Parfocal length 60mm lens ⇒ Parfocal length 95mm
		PE15-25-2032＋Parfocal length 45mm lens⇒Parfocal length 60mm
		PE35-26-25＋PE15-25-2032＋Parfocal length 45mmlens ⇒Parfocal length 95mm